The TS EN ISO 1461 Standard: Quality Criteria for Hot-Dip Galvanized Coatings

TS EN ISO 1461 is the international standard that defines the quality requirements for hot-dip galvanized coatings applied to iron and steel products. It covers a wide range of criteria, from minimum coating thickness to surface appearance.

Minimum Coating Thickness by Steel Thickness

One of the standard’s central requirements is a minimum local and mean zinc coating thickness that scales with the thickness of the base steel:

  • Steel ≥ 6 mm: local minimum 70 µm / mean minimum 85 µm
  • Steel 3-6 mm: local minimum 55 µm / mean minimum 70 µm
  • Steel 1.5-3 mm: local minimum 45 µm / mean minimum 55 µm
  • Steel < 1.5 mm: local minimum 35 µm / mean minimum 45 µm

Other Criteria the Standard Covers

  • Surface smoothness and uniformity, free of blisters, flux residue and gross imperfections
  • Adhesion strength testing to confirm the coating will not flake or peel under normal handling
  • The “holiday test” (continuity/porosity testing) to detect uncoated spots or discontinuities
  • Sampling and inspection procedures for batch acceptance

Altınova Epoxy Galvaniz Compliance

All galvanizing carried out at our facility is performed in full compliance with both TS EN ISO 1461 and the equivalent American standard, ASTM A123. Every batch is certified after passing our internal quality control tests, including coating thickness measurement and adhesion checks.